To Next Page

To Previous Page

Note: The MACRO mode must be turned OFF ( ) when you want to use the following feature of

your camera: Flash.

1) Press the SET button to open the menus for the current mode.

2) Press the LEFT or RIGHT button to scroll and select the ‘Macro’ menu.

3) Press the UP or DOWN button to highlight a specific option.

4) Press the SET button to confirm and select the highlighted menu option.

A selected option icon appears on the selected item.

5) To continue within the menus and select a different menu option:

Press the LEFT or RIGHT button to select the next menu item.

6) To exit the menu view:

Press the MODE button to exit the menu and return to your previous mode.

An icon reflecting your selection is displayed on the LCD screen.

The ‘White Balance’ feature allows your camera to adjust the coloring of the captured images

depending on the type of light source in the current environment.

Properly adjusting the White Balance setting to match your current environment will allow the

camera to properly balance the colors in the images that are taken with your camera.