19
Polaroid PDC 3150 Digital Camera User Guide
www.polaroid-digital.com
• Exposure and white balance
A. When there are proper exposure and white balance value subject
to your current light condition for capturing, the icon display will
turn green.
B. When there are improper exposure and white balance value subject
to your current light condition for capturing, the icon display will
turn red.
• Operation LED turns red and blinks when setting auto focus, exposure
and white balance, it will stop blinking and turn red afterward.
• When ash is set to “OFF”, the LCD screen might show “PLEASE
OPEN THE LENS COVER OR TURN ON THE FLASH”, please turn on
the ash.
IMPORTANT!
• We highly recommend the user to take picture after framing mark and icon
display have turned green except taking picture in dark environment.
• When the camera’s exposure and white balance function are not ready or your
capturing condition is over the camera’s setting, the framing mark and icon
display on the LCD screen will turn red. Under the above condition, if you still
take the picture, the picture taken is in risk of over exposure or too dark.
Shutter button
5. Press the Shutter button completely down
to take a picture. Hold the camera steady. A
beep will sound when the picture has been
taken. Operation LED will turn green and
blink when processing picture, it will stop
blinking afterward.
When the ash mode is set to Off “ ”, the icon might appear on LCD
screen to remind you to hold the camera steady.
To Next Page
Loading...
Need help?
General
