Camera/Printer Connection
Connecting with the USB Cable.
To Printer
USB port
1. Plug Series A of the USB cable into the marked socket on your
printer. Location of USB socket will vary from printer to printer.
2. Plug Series Mini B of the USB cable into the port on your camera.
DEVICE
IS CONNECTED
PLEASE
CONNECT TO DEVICE
SELECT
THIS IMAGE
ALL IMAGES
ALL INDEX
PRINT SETTING
Camera/Printer
connection via
USB cable
NOTE:
• “
DEVICE IS CONNECTED” displays on the LCD screen, indicating a
proper connection to the printer.
• Do not connect the USB cable to the camera until PictBridge is enable and
when prompted by the “PLEASE CONNECT TO DEVICE” screen. Or if you
already have connected the cable to the camera, do not plug into printer
until prompt to do so. Not following this sequence will result in connection
failure.
To Next Page
Loading...
Need help?
General
