33
Video Setup Page
2.Dynamic
This item is used to adjust linear dynamic
compression rate to get different signal
compression Effects.
Press the or button to highlight this item.
Press the ENTER or to enter the setup of this
item. Then the item will show as the left.
Press the or to choose the proper level.
Press the ENTER button to confirm your selection.
Press the direction button to exit this item.
The items included in this sub-menu are shown as
the left.
1.Sharpness
This item is used to adjust the sharpness of the
Screen.
Press the or button to highlight this item.
Press the ENTER or to enter the item.
It included High, Medium and Low, Low by default.
Press or button to choose the proper one.
Press ENTER button to confirm your selection.
Press direction button to exit this item.
2. Brightness
This item is used to adjust brightness level of the
Screen.
Press the or button to highlight this item.
Press the ENTER or to enter the item.
Press the
or button to adjust to desired level.
The default level is 00.
Press the ENTER button to confirm your selection.
System Setup
To Next Page
Loading...
Need help?
General
