a) Click -> enter the camera mode.
b) Click to start editing after taking photo.
c) Click to insert emote
2. Photo Printing:
a) After photo had being edited, click to enter printing mode.
b) Click the “OK” button to print the photo in the pop-up preview window.
c) Click cancel to terminate printing
3. Photo Sharing:
a) After editing photo, click to enter the sharing screen.
b) Click “next” to upload the photo to “SocialMatic.
Important notes
☆ store media paper in cool dry locations
☆ do not expose the paper to high temperature / high humidity conditions (e.g.; car, beach, etc. For
extended periods
☆ if paper is subjected to high or low temperatures, return to normal conditions for one hour before
printing
☆ do not touch or pull the paper while printing
☆ do not bend or scratch photos, and avoid touching the print side.
Do not shut off the camera power while printing.
Do not open the paper tray door while printing
To Next Page
Loading...
Need help?
General
