12 | EN
7
Capture Settings
From the live viewfinder, tap this icon to access the configuration settings for each capture mode.
Still Photo Settings
For the camera mode, the configurations are Flash, HDR and Delay. These settings are turned off by default and will have
a slash through them. Tap the icon to change the status. These settings apply to single still shots and photobooth shots.
The settings need to be changed one at a time, and you’ll be taken back to the live viewfinder after selecting each setting.
Flash turns the flash on, off, or auto.
HDR stands for High Dynamic Range, a method that adjusts the ratio of light to dark in a photograph by using
different exposures.
Delay lets you set a timer for the camera to automatically take a shot after either 3 or 10 seconds. When Delay is
selected, a countdown will display in the live viewfinder once the shutter button is pressed.
Video Settings
You can change the video quality to 1080p, 720p, or VGA (Video Graphics Array – 480p) resolution. The default setting is
1080p. Video is taken at 30fps.
Capture Settings
To Next Page
Loading...
Need help?
General
