Operation Sound
Your camera is equipped with a buzzer for operation sound.
Buzzer Camera Status
Two beeps
Denotes the start of an operation like recording and printing. Also beeps
when using menu and set properties.
Three beeps
Denotes low battery and other warning and error message like memory full
and card error.
C o n t i n u o u s
beep
Beeps every second for countdown if self-timer is set between 3 to 10
seconds. Beeps every half second if self-timer is set between 0 to 3 seconds.
Beep goes off after the countdown.
Shutter sound The shutter is pressed to record an image.
A startup sound can be set when you power on your camera in the sound
setting menu. See “Setting Sounds” on page 77.
• Camera Memory
Internal memory
Your camera is equipped with 32MB of internal memory. Users can store
images up to 10MB. If there is no memory card inserted in the memory
card slot, all images, videos and audio clips recorded are automatically
stored in the internal memory.
External storage
Your camera supports SD cards of up to 4GB in size. It also supports
SDHC cards with a maximum capacity of 8GB. If there is a storage card
inserted in the memory slot, the camera automatically saves all images,
videos and audio clips in the external storage card. The icon indicates
the camera is using SD card.
To Next Page
Loading...
Need help?
General
