Selecting the Smile Detection Mode
This feature is based on “Face Tracking”. When you use smile capture,
you need to set the face tracking feature on rst.
Enter to the scene mode, Use the navigation controls to select “Smile
Capture” item and press SET button to confirm.
Selecting the Blink Detection Mode
NO MORE CLOSED EYES IN YOUR PICTURES.
This feature allows the camera to detect when your subjects’ eyes are
open. The camera will only take the pictures when the subjects’ eyes
are open. If you have taken blinked pictures, there will be a red frame
on the subjects’ faces. When you playback the pictures, there will be an
exclamation mark and a triangle to indicate you have blinked pictures.
Enter to the scene mode, Use the navigation controls to select “Blink
Detect” item and press SET button to confirm.
Selecting the Photo Stitch Mode
This feature is used for shooting scenery. Use Photo Stitch to make your
panoramic pictures or combine different scenes into one picture.
Enter to the scene mode, Use the navigation controls to select “Photo
Stitch ” item and press SET button to confirm.
To Next Page
Loading...
Need help?
General
