• Using the Record Menu
If you are in Record mode, you can access the Record menu simply
by pressing the MENU button on your camera.
When the menu is displayed, use the 4-way navigation control and
the SET button to move through menu selections and apply your
desired settings. To close the menu anytime, press the menu
button again.
Record Menu
The Record menu allows you to change modes, and setup other capture
settings.To go to Record Menu:
1. Set the camera to Record mode. See
“Switching between Record mode and
Playback Mode” on page 23.
Record Mode
Drive Mode
AEB
AF Area
AF Lamp
Sharpness
OFF
OFF
2. Press to launch the Record Menu.
3. Use the or keys to move through
the menu selections.
4. To select an item, press .
5. Change the submenu settings using the
4-way navigation control.
6. Press the SET button to save and apply
settings.
To Next Page
Loading...
Need help?
General
