• Single. Select a single image to mark.
• All. Mark all images in the memory card.
• Reset. Reset all DPOF settings to initial default settings.
To set DPOF on a single image:
1. Select Single on the DPOF submenu.
2. Use the or keys to scroll and select
an image to mark for printing.
00
00
Copies
DPOF
Date stamp off
3. Specify number of copies. Use the or
keys to increase/decrease number.
4. Press the Func button to toggle between
turning on/off the date stamp.
5. Press the SET button to save DPOF settings.
To set DPOF on all files:
1. Select All on the DPOF submenu.
0000
Copies
DPOF
Date stamp off
2. Specify number of copies. Use the
or number.keys to increase/decrease.
3. Press the Func button to toggle between
turning on/off the date stamp.
4. Press the SET button to save DPOF settings.
To Next Page
Loading...
Need help?
General
