EN-27
Erasing Images
Erasing a single image / Erasing all images
1. Toggle the MODE button to [ 7 ].
The last image appears on the screen.
2. Select the image you want to erase with the
e
/
f
buttons.
3. Press the OK button.
4. Select [Single] or [All] with the e / f buttons,
and press the OK button.
[Single]: Erases the selected image or the
last image.
[All]: Erases all of the images except for the
protected images.
5. Select [Confirm] with the e / f buttons, and
press the OK button.
To not erase, select [Cancel], and press the
OK button.
6. To exit from the menu, press the MENU button.
Removing Red-eye
You can use this function to remove the red-eye effect after an image is taken.
1. Toggle the MODE button to [ 7 ].
The last image appears on the screen.
2. Select the image that you want to edit with the
e / f buttons.
3. Press the MENU button.
4. Select [Fix Red Eyes] with the c / d buttons,
and press the OK button.
5. Select [Confirm] with the e / f buttons, and
press the OK button.
6. View the changes on the corrected image.
7. To save your corrected image, select [Confirm]
with the e / f buttons, and press the OK
button.
When this process ends, this replaces the
original image with the corrected image.
;;
;;
;;
;;
To Next Page
Loading...
Need help?
General
