geneo+U
10
GENEO
+U
ASSEMBLY
Unpack geneo+U and verify that the system is intact and that all components are present. It is
recommended to save the packaging box and materials for future transport.
Assemble the geneo+U by connecting the Body Unit to the Base Unit using the provided screws
and the screw driver. Plug in the Applicator cable into the appropriate connector on the back of the
geneo+U system. Verify that you hear a click. Place the Applicator in the Applicator cradle
Place the geneo+U on a stable rigid surface and connect the supplied Power Supply into the
system. Plug in the Power Supply’s electric cord into the electrical outlet.
Base Unit top view Assembly Illustration
To Next Page
Loading...
