Polocool EX10 - User Manual

Questions and Answers

S
stacycummingsAug 12, 2025
Why is my Polocool EX10 Air Conditioner not cooling satisfactorily?
- J
  Jared BaldwinAug 12, 2025
  If your Polocool Air Conditioner isn't cooling well, several factors could be at play. First, make sure the unit's cooling power is appropriate for the room size and conditions. Check for blockages in the air exhaust hose or if it's bent; clear any obstructions and ensure it's as straight and short as possible, not exceeding 1.5 meters. Ensure the air exhaust hose is connected properly. Close any open windows or doors. Clear any blockages from the air inlet or outlet, and clean the air filters if they're dirty. Increase the fan speed if it's set too low, and lower the temperature setting.
R
Robert JohnsonAug 20, 2025
How to fix Polocool Air Conditioner with no power?
- D
  Dr. Charles Castillo DDSAug 20, 2025
  If your Polocool Air Conditioner has no power, ensure the power plug is securely inserted into the power supply outlet and that the power is turned on. If that doesn't work, turn off the A/C, replace the fuse wire (or turn on the circuit breaker), and then turn the A/C back on.
J
John StoneAug 27, 2025
What to do if Polocool EX10 vibrates?
- M
  Matthew LarsonAug 27, 2025
  If your Polocool Air Conditioner vibrates, ensure it is placed on a level floor. It may be leaning or unbalanced.
T
thomas99Sep 4, 2025
Why Polocool EX10 does not cool after turning on?
- S
  Shawn McdanielSep 4, 2025
  If your Polocool Air Conditioner doesn't cool after turning it on, wait 3 minutes. A safety device prevents the compressor (which provides cooling) from turning on for about 3 minutes. Also, drain any excess water from the unit.