Polon-Alfa IGNIS 2000 - Page 2

2 ID-E339-001GB
The IGNIS 2040 conventional fire detection and alarm control panel covered by the present manual
complies with the requirements of the following European Union Directives:
CPD 89/106/EWG on construction materials;
EMC 2004/108/WE on electromagnetic compatibility
LVD 2006/95/WE on low-voltage electric equipment.
The IGNIS 2040 control panel has been approved with the EC-Certificate of Conformity No.
1438/CPD/0243 issued by the Scientific and Research Centre for Fire Protection (CNBOP) Józefów,
Poland, an EU notified authority No. 1438, confirming its compliance with the requirements of PN-EN
54-2:2002+A1:2007 standard.
The device has been also approved with the Allowance Certificate No. 1131/2011 issued by CNBOP.
The certificate may be downloaded from
www.polon-alfa.pl web site.
1438
Polon-Alfa Spółka z ograniczoną odpowiedzialnością Sp. k.
155, Glinki Street, PL 85-861 Bydgoszcz, POLAND
11
1438/CPD/0243
EN 54-2:1997+A1:2006
The IGNIS 2040 fire detection and alarm control panel
Conventional, for indoor use
Provided options:
- fire alarming devices output
- output signal delays
- interdependent alarming
- testing mode
- alarm counter
and additional functions, inputs and outputs: see technical data contained
in ID-E339-001GB manual
Read the manual carefully before the detector assembling and commissioning.
Any nonconformity with the instructions contained in the manual may be harmful or may cause
violation of the law in force
POLON-ALFA bears no responsibility for any damage resulting from usage inconsistent with the
manual.
A waste product, unsuitable for further use, shall be passed to
a waste electric and electronic equipment collection point.
NOTE: The manufacturer reserves the right to change specifications of products at any time
without prior notice.