Polono PL60 - Operation Panel and Indicator Status

PL60 User Manual
23
3.4 Operation Panel
3.4.1 Feed Button

Power on
While powered off, power on the printer using the power switch located at the back
of the printer. The status indicator will light up.
 Power off
While powered on, power off the printer using the power switch located at the back
of the printer. The printer will shut down and the status indicator will no longer light
up.

Feed Button
1) While powered on, press the feed button to feed the paper to a preset position. If
you are using continuous paper, long press the feed button to feed a fixed length of
paper. If you are using label paper, press the feed button to feed one label.
2) While the printer is printing, press the feed button to pause the current print job.
The status indicator will show a flashing green light. Press the feed button again to
resume printing.
3.4.2 Indicator Status
Color
Action
Indicator Status
Blue
Steady
Ready
Blue
Slow flash
Dump mode
Purple
Steady
Overheated print head