PL60 User Manual
IMPORTANT SAFETY INSTRUCTIONS
Before using the printer, carefully read the following safety considerations in the event of bodily
injury or equipment damage.
1.Safety warning
The print head will become very hot during printing. Do NOT touch the print head or its
peripheral parts during printing or when printing just finished.
Do NOT touch the print head or its contact points to prevent static-induced damage
to the print head.
2.Instructions
Warnings: Violating the following instructions may cause serious injury or death.
1)Do not oversaturate a single power outlet.
• This may cause the products to overheat and start a fire.
• If the plug is wet or dirty, dry or wipe it before using.
• If the plug does not fit perfectly in the outlet, do not plug it in.
• Be sure to use a standardized power outlet.
2) You must use the supplied adapter.
• It is dangerous to use other adapters.
3) Do not remove the plug by pulling on the cable.
• This may damage the cable or cause a fire.
4) Do not plug in or unplug with your wet hands.
• You may be electrocuted.
To Next Page
Loading...