For more information about setting up and using the system, refer to the Support pages at support.poly.com
Quick Tips for Using Bluetooth with Poly Edge E Series Phones
3725-47530-001A | Poly Voice OS Software 8.1.0 and later | March 2023
These Quick Tips apply to Poly Edge E Series
Phones.
For more information, see the Poly Edge E Series
Phones User Guide at Poly Support
.
Pair and Connect a Device
Connect a mobile device via Bluetooth to manage
your contacts and place calls using your phone’s
microphone and speaker.
Enable Bluetooth
To enable Bluetooth:
1 Do one of the following:
Go to Menu > Bluetooth.
Go to Settings > Basic > Bluetooth
Settings.
2 Select Bluetooth.
3 Select On.
Pair a Bluetooth Device
To pair a Bluetooth device:
1 Do one of the following:
Go to Menu > Bluetooth.
Go to Settings > Basic > Bluetooth
Settings.
2 Select Manage Devices.
3 Select Scan.
4 Select your device from the list.
5 Select Pair.
6 If required for your device, do the following:
a Verify that the Bluetooth pairing code
matches between your phone and your
device.
b Select Pair on your device.
7 Select Accept on your phone.
On the home screen, the Bluetooth
headset connected icon displays in the
status bar.
8 (Optional) If your phone doesn’t
automatically connect to the Bluetooth
device, select Connect on your phone.
Pair an Android Device Using NFC
To pair an android device using NFC:
1 Enable NFC on your mobile phone.
2 On your phone, enable Bluetooth and make
it discoverable.
3 Tap and hold your device for two seconds to
the center of the display on your phone.
4 Accept the pairing requests on your device
and on your phone.
Your phone displays a message your phone
and mobile phone are paired.
Fast Pair a Headset
The Poly Fast Pair feature enables you to quickly
pair a supported Bluetooth headset to a
supported phone.
The following headsets support Poly Fast Pair:
● Poly Voyager Focus 2
● Poly Voyager 4320
● Poly Voyager Free 60
The following Edge E Series phones support Poly
Fast Pair:
● Edge E220
● Edge E320
● Edge E350
● Edge E450
● Edge E550
To fast pair a headset:
1 Put your headset in pairing mode and place
it within 0.91 m (3 ft) of your phone.
2 Select Connect.
The phone displays a confirmation screen
with an image of the headset and a battery
status indicator.
3 Select Done.
On the home screen, the Bluetooth
headset connected icon displays in the
status bar.
To Next Page
Need help?
General
