Poly Rove B2 - Page 7

Click Submit. Otherwise your changes will be lost.
On Configuration Update Screen, click the Return button to continue the configuration
process.
Go to Voice Services in the left navigation menu.
■
Click on SP1 Service
■
Enter or set the following details into the respective fields.
■
REQUIRED FIELDS:
Clear the Enable default check box and check value to enable the service.
Clear the X-ServProvProfile check box and select A to associate to ITSP Profile A.
Clear the X_Handset check box and select 1 to associate it with the appropriate Rove
handset.
Under SIP Credentials section clear the AuthUserName check box and enter PBXware
Extension Username. Example: 700101.
Clear the AuthPassword check box and enter PBXware Extension Secret.
The Secret of the Extension as received in the e-mail associated with this Extension.
Example: _%Z4M3*Ts9y7. A password is generated automatically for each newly
created Extension.
Click Submit.
Click Reboot button.
■
You will have to wait some time for the device to reboot. If everything is done as described
■
above, you should have successfully registered your device to PBXware.
Dial *123 to verify the registration.
Registering a Handset
This section describes how to register the Poly Rove 30 handset or Poly Rove 40 handset with
Poly Rove B2 device.
NOTE: Before the registration, please make sure that the base station is in the registration
mode, and the phone displays "Unregistered!".
Open a new browser window and enter the phone's IP address in order to access the phone's
■
web administration interface login screen. Example: http://192.168.1.22