Your new headset has enough power to pair and make a few calls directly out of the box. It takes
approximately 90 minutes to fully charge the headset; the indicator light turns off once charging is
complete.
A micro USB cable is supplied to allow you to charge the headset with an AC wall charger (not
included) or through a PC's USB port. The PC must be powered on to charge via USB 2.0 or higher.
Or you can use the charge case.
NOTE Always charge at near room temperatures; never charge battery at temperatures below 0°C
(32°F) or above 40°C (104°F).
There are multiple ways to check the battery level of the headset:
• Listen to voice prompts on the headset by pressing the Call
button.
• Check the LED indicators on the headset or charging case.
• Use the Plantronics Hub application for desktop or mobile. You can download the software by
visiting poly.com/software.
Charge your Headset
Check Battery Level
6
To Next Page
Loading...
Need help?
General