Need help?Do you have a question about the Poly Voyager 4310 UC and is the answer not in the manual?
General| Battery Life | Up to 24 hours |
|---|---|
| Wearing Style | Over-the-head |
| Bluetooth Version | Bluetooth 5.2 |
| Talk Time | Up to 24 hours |
| Speaker Frequency Response | 20 Hz - 20 kHz |
| Supported Platforms | Windows, MacOS, iOS, Android |
| Connectivity | Bluetooth, USB |
| Microphone | Noise-canceling |
| Charging Time | 1.6 hours for a full charge |
| Compatibility | PC, Mac |
| Microphone Frequency Response | 100 Hz - 8 kHz |
| Warranty | 2 years |
| Wireless Range | Up to 50 m / 164 ft |
Read the safety guide for important safety, charging, battery, and regulatory information before using your new headset.
Turn on headset, insert USB adapter. LED indicates connection. Load Poly Lens App for customization.
Set Poly BT700 as default audio device in Windows Sound settings or Mac System Preferences.
Put headset in pair mode, then activate Bluetooth on your phone and search for new devices.
Charge using USB cable or stand. Headset LEDs flash while charging. Full charge takes approx. 90 mins.
Keep firmware updated via Poly Lens Desktop App for improved performance and new features.
Tap Call button to answer/end calls, hold calls, or switch between active calls.
Connect headset via USB adapter to PC/laptop. Adapter pairs headset to computer audio. See Connect to PC.
Check computer sound settings, ensure only one softphone is open, and update headset firmware.
Check firmware, ensure one softphone open, install Poly Lens App for control, and select softphone.
To Next Page