Poly Voyager 4310 UC User Manual

3 Select “Poly V43XX Series.”
Once successfully paired, you hear “pairing successful” and the headset LEDs stop flashing.
NOTE Your headset can pair with up to 8 devices but only maintain 2 connections
simultaneously; this includes the Bluetooth adapter.
Typically, your USB adapter is pre-paired to your headset. In the event that your adapter is
disconnected or bought separately, you will need to pair the adapter to your headset.
1 Insert the high-fidelity Bluetooth USB adapter into your laptop or computer and wait for
your computer to recognize it.
2 Put your headset in pair mode.
3 Put your Bluetooth USB adapter into pair mode by selecting "Pair" in Poly Lens App. Your
adapter flashes red and blue.
Pairing is successful when you hear "pairing successful" and "PC connected" and the
Bluetooth USB adapter LED is solid.
Slide and hold the headset Power
switch away from the off position until the LEDs flash
red and blue.
Pair USB adapter
again
Pair mode
6

Poly Voyager 4310 UC Specifications

General

Battery Life	Up to 24 hours
Wearing Style	Over-the-head
Bluetooth Version	Bluetooth 5.2
Talk Time	Up to 24 hours
Speaker Frequency Response	20 Hz - 20 kHz
Supported Platforms	Windows, MacOS, iOS, Android
Connectivity	Bluetooth, USB
Microphone	Noise-canceling
Charging Time	1.6 hours for a full charge
Compatibility	PC, Mac
Microphone Frequency Response	100 Hz - 8 kHz
Warranty	2 years
Wireless Range	Up to 50 m / 164 ft