Check if the DNS SRV is enabled in your PBXware
Contact your PBXware administrator to find out if the DNS SRV is enabled in your PBXware,
■
or if you have access to the PBXware you can check this yourself.
Open a new browser window and enter the IP address in order to access the PBXware web
■
administration login screen. Example: http://192.168.1.10.
Login to PBXware with your e-mail address and password.
■
Navigate to Settings: Servers. Click on the server corresponding edit button.
■
In Auto Provisioning group, make sure Use DNS SRV when possible: is set to Yes. If it is
■
set to No or N/A, set to Yes and click on the Save button. NOTE: You must re-save all your
extensions configured for Auto Provisioning.
Follow instruction given for registering the phone using TFTP or HTTP & HTTPS.
■
Retrieved from
"http://wiki.bicomsystems.com/PBXware_3.8.2_UAD_Polycom_IP_5000_user_manual"
Disclaimers - About Bicom Systems Wiki
To Previous Page
Loading...
