06
4.1 Creating User
Defined Programs
Use the navigation keys to move from Auto to P.
Press (OK) to make P1/P9 adjustable.
Use the (-) or (+) keys to choose P1 to P9, or U1 to U4
Select from U1 to U4 as this allows each thermostat to store up
to 4 user defined programs in its memory.
With U1 to U4 blinking press the Program Key
(
•
) to access the
program settings.
- The program creation will always start with the day 1 (Monday).
Once you have pressed the
(
•
) key, the following display
will appear:
Adjust the hour of the first step of the program with (-) or (+).
Press (OK) to validate and jump to the following step.
The pictogram will blink meaning that you can toggle between:
Choose and, press (OK) to validate.
Adjust the minutes of this step with (-) or (+).
Press
(OK) to validate and move to jump to the next step.
If you selected the option you will automatically be
required to select the return
time with (-) or (+).
Select the return time, press (OK) and move to the next step.
The pictogram will blink again meaning that you can toggle
between:
and
and
To Next Page
Loading...
