Need help?Do you have a question about the Polypipe UFHPROGW and is the answer not in the manual?
General| Product Type | Thermostat |
|---|---|
| Brand | Polypipe |
| Model | UFHPROGW |
| Mounting | Wall Mounted |
| Power Source | Mains |
| Voltage | 230V |
| Current Rating | 3A |
| Display | LCD |
| Programmable | Yes |
| Wireless | Yes |
| Floor Sensor | Yes |
| Air Sensor | Yes |
| Compatibility | Underfloor Heating Systems |
| Type | Programmable |
Explains the function of a programmable room thermostat and its benefits.
Key installation guidelines and warnings for proper thermostat mounting and handling.
Detailed steps for separating, wiring, and mounting the thermostat unit.
Instructions on how to change the operational mode from thermostat to time clock and vice versa.
Detailed explanation of each numbered indicator and symbol on the thermostat's LCD screen.
How the thermostat displays room or floor temperature and how to switch between them.
Explains the three programming modes available for setting comfort levels.
Guide to adjusting time and temperature for comfort levels, covering Wake, Leave, Return, and Sleep.
Steps to confirm settings, scroll to DONE, and save changes.
How to use Up/Down keys to adjust the set temperature value.
How to manually override the program and set a temporary temperature hold.
Options to cancel or edit an active temperature hold.
Procedure to activate the keypad lock facility using a four-digit PIN.
Procedure to unlock the thermostat using the previously set four-digit PIN.
How to set a holiday period to maintain a reduced temperature.
Explains how to set temperature units (°C/°F) and the switching differential.
Details on output delay, temperature up/down limits, and sensor selection.
Details on sensor options and floor temperature limiting.
Information on optimum start, rate of change, and programming modes.
Settings for DST and the number of comfort levels.
Lists and explains common error codes (E0, E1) related to sensor faults.
Diagram showing how to wire the thermostat for volt-free boiler output.
Diagram illustrating wiring for a switch live connection to a heating valve.
Diagram showing wiring for switch live connection to a UH8 unit.
Explanation of indicators and symbols specific to the time clock mode display.
How to select the day/period to program switching times.
Guide to setting the ON and OFF times for switching periods.
To Next Page
