Polypipe UFHPROGW - Setting Time and Date

12
To set the clock, follow these steps.
• Use the ‘Left/Right’ arrow keys to highlight then press and hold the
button for 3 seconds .......................................................................................................................
At this point the screen will go blank showing only ‘SETUP’ and ‘CLOCK’.
• Tap the ‘Up’ followed by ‘Right’ keys to highlight ‘CLOCK’ ........................................................
• Press
to conrm selection (‘Hour’ digits will now ash) .....................................................
• Use the ‘Up/Down’ arrow keys followed by
to set the ‘Hours’ .........................................
• Use the ‘Up/Down’ arrow keys followed by
to set the ‘Minutes’ ...................................
Repeat the previous two steps to set the date (‘Day, Month & Year’).
Display will go blank once completed.
• Press the ‘Down’ arrow key followed by
to return to the main display .......................
Setting the Time and Date
Model: UFHPROGW