Polypipe UFHPROGW - Powering the Thermostat On and Off

11
Thermostat completely OFF
Thermostat powered ON
Power On/O
The heating is indicated ON when the ame icon is displayed.
When the Flame Icon is absent, there is no requirement for heating to achieve the
set temperature but the thermostat remains active.
To turn the thermostat o completely, scroll to the Power Icon and hold the
key for approximately 3 seconds until the display goes blank ............................
The display and heating output will be turned OFF.
To turn the thermostat back ON, press the
key once ............................................................