Polypipe UFHPROGW - Adjusting Optional Settings

Section Header
24
Adjusting the Optional Settings
Use the ‘Left/Right’ arrow keys to highlight then press and hold the
button for 3 seconds ..............................................................................................
The display will go blank showing only ‘Setup’ and ‘Clock’
• Press the ‘Up’ key followed by twice
to access main feature menu .....
• Use the ‘Up/Down’ keys to scroll through features ........................................
• Use the ‘Left/Right’ keys to change feature setting ........................................
• When all required changes have been made press
to conrm settings
and return to the blank display ...................................................................................
• Use the ‘Down’ key to select then press
once to power on ..............
Adjusting the Optional Settings
button for 3 seconds .............................................................................................
dna sserp neht thgilhgih ot syek worra ’thgiR/tfeL‘ eht esU • hold the
•
The display will go blank showing only ‘Setup’ and ‘Clock’
•
Press the ‘Up’ key followed by twice to access main feature menu .......
•
Use the ‘Up/Down’ keys to scroll through features ..........................................
Use the ‘Left/Right’ keys to change feature setting ..........................................
•
and return to the blank display .......................................................................................
sserp neht tceles ot yek ’nwoD‘ eht esU once to power on ...............
Feature Setting
Feature No.
Model: UFHPROGW