Polypipe UFHPROGW - Timer Override Function

33
Timer Override
To override the timed output ‘ON/OFF’, follow these steps.
• Use the ‘Left/Right’ keys to highlight ‘HOLD’ then press
................................
• Use the ‘Up/Down’ keys to set the hours then press .......................................
• Use the ‘Up/Down’ keys to set the minutes then press ..................................
• Use the ‘Up/Down’ keys to set output On or OFF then press to conrm .....
Hold Left and the remaining time will now be displayed.
To cancel Timer Override
• With ‘HOLD’ highlighted, press
twice .......................................................................