Polypipe UFHPROGW - Editing Comfort Levels; Programming Mode Options Overview; Setting Comfort Level Parameters

Section Header
14
The UFHPROGW oers three program mode options; Weekday/Weekend,
7 Day and 24 Hour programming. There is also the option to use the UFHPROGW as
a manual thermostat.
The thermostat is supplied with comfort levels already factory programmed, but these can be
changed easily. The default times and temperature settings are;
07:00 - 21°C Wake (1) 09:00 - 16°C Leave (2) 16:00 - 21°C Return (3) 22:00 - 16°C Sleep (4)
Unused levels must be set to --:-- so that the UFHPROGW will skip these and continue on
to the next programmed time.
For Weekday/Weekend programming, the four comfort levels are the same for Mon-Fri, but can be
dierent for Sat-Sun. For 7 Day programming each day of the
week can have four dierent comfort
levels. In 24 Hour mode all days are programmed with the same comfort levels.
• To program the ‘Comfort Levels’, use the ‘Left/Right’ keys to scroll to ‘EDIT’ ...............
• Press
to conrm selection ......................................................................................................................
• Use the ‘Left/Right’ keys to select day/period of week (the selection will ash) .....
• Press
to conrm selection ........................................................................................................................
‘Level 1’ will now ash and the current time and temperature setting will be shown.
• Press
to alter ‘Wake (1)’ settings.............................................................................................................
Edit the Comfort Levels
Model: UFHPROGW