P1
P2
P3
P4
P5
P6
7:00
09:00
12:30
15:00
17:30
23:00
20°C
17°C
20°C
19°C
22°C
17°C
4.
PROGRAMMING THE
THERMOSTAT
Thermostat programming allows setting of the
switch-on hours and selection of the desired
temperatures for each programming band. The
thermostat can be programmed in daily/weekly
mode and can manage 6 daily schedules and two
temperature levels. The temperature set for a specic
time interval is valid until the next time interval is
activated. For example, the thermostat keeps the
programmed temperature for the switch-on time P1
until the switch-on time P2 is activated.
Note! The thermostat software recognises only
increasing consecutive progressions to be set, based
on the series number (P1; P2; etc.) of the ignitions.
For example, P3 cannot have a lower time than the
one associated with P2
With the factory settings the thermostat operates with
the following programming for all the days of the week:
The following diagram shows the temperature pattern
based on the factory settings for 24 hours a day.
To Next Page
Loading...