• Press the "COPY" button to copy the selected
day's program. The copy stops the number from
flashing indicating that the copy has been made
• Press the (-) or (+) buttons to select the day on
which to "paste" the program of the day copied
rst. After selecting the day, press the "COPY"
button to copy the selected day's program.
• After copying the program, press the "SET"
button to return to the main screen. (After
approximately10 seconds the copied program will
be automatically conrmed and the device will
return to the main screen).
4.3 Inspection of the program
• Press the "PROG" button. The series number
indicating the day (days), the P1 ignition symbol
and the P1 time and temperature level program
will appear on the display. (None of the values will
ash). Repeatedly press the "PROG" button to
check the values of the P2, P3 ignitions, etc.
• After checking the program, it is possible to return
to the main screen by pressing the "SET" button.
(After approximately 10 seconds, the device will
automatically return to the main screen).
4.4 Program cancellation
Press the "RESET" button to delete all the programs.
Press the "RESET" button to reset the device to
factory settings.
To Next Page
Loading...