Do you have a question about the Polytec OFV-353 and is the answer not in the manual?
Brand | Polytec |
---|---|
Model | OFV-353 |
Category | Measuring Instruments |
Language | English |
Guidelines and precautions for safe operation involving laser radiation.
Details about laser warning labels used on the vibrometer for different regions.
Guidelines for safe electrical connection and operation of the vibrometer.
Step-by-step guide for installing and performing an initial functional test of the vibrometer.
Installation and functional test for vibrometers using OFV-303/-353 sensor heads.
Installation and functional test for vibrometers using OFV-511/-512 sensor heads.
Procedure for starting up the vibrometer system before making measurements.
Start-up procedure for vibrometers with OFV-303/-353 sensor heads.
Start-up procedure for vibrometers with OFV-511/-512 sensor heads.
Operation of the laser beam shutter and understanding emission indicators.
Basic tests to perform if the vibrometer is not functioning properly.
Troubleshooting steps for situations where no laser beam is emitted.
Troubleshooting steps when a laser beam is present but no measurement signal is received.
A systematic checklist for diagnosing faults in the vibrometer system.
Fault diagnosis checklist for the OFV-3001 controller with OFV-303/-353 sensor heads.
Fault diagnosis checklist for the OFV-3001 controller with OFV-511/-512 sensor heads.
Detailed description of the velocity decoder models and their characteristics.
Overview of the available velocity decoders (OVD-01, OVD-02) and their features.
Explanation of the operating principle behind velocity decoding using FM demodulation.
Detailed description of the displacement decoder and its operating principles.
Explanation of the operating modes of the displacement decoder, including direct counting.
Overview of the different displacement decoder models available (OVD-10, OVD-20, OVD-30, OFV-600, OVD-40).
Detailed explanation of the operating principle of the displacement decoder.