Need help?Do you have a question about the Polytec PSV 300 and is the answer not in the manual?
General| Type | Scanning Vibrometer |
|---|---|
| Measurement Principle | Laser Doppler Vibrometry |
| Frequency Range | 0 Hz to 1 MHz |
| Laser Wavelength | 633 nm |
| Laser Power | 1 mW |
| Operating System Compatibility | Windows |
| Dimensions (W x H x D) | 300 mm x 150 mm x 200 mm |
Information on laser safety, including precautions and warnings for operating the PSV.
Guidelines for safe electrical operation of the PSV, including connection and grounding.
Essential requirements for operating and maintaining the PSV, including environment and connections.
Detailed steps for mechanically assembling and cabling the PSV system components.
Procedure for performing an initial functional test of the PSV system to verify operation.
Steps to power on and initialize the PSV system and its components for measurement.
Procedure for powering on and off the controller, workstation, and junction box.
Instructions on using the beam shutter to block the laser beam for safety and system stability.
Steps for focusing the laser beam using the hand set PSV-Z-051 or optional accessories.
General troubleshooting steps and basic tests to identify PSV system issues.
Troubleshooting steps for diagnosing issues when no laser beam is emitted.
Steps to diagnose and resolve problems when no velocity signal is detected.
To Next Page
