Opening up of the Opening up of the equipment without authorization is not necessary for itsequipment without authorization is not necessary for its
operation and will invalidate the warranty.operation and will invalidate the warranty.
The PSV consists of the following components:The PSV consists of the following components:
controller OFcontroller OFV-3001V-3001SS
scanning head OFV-056scanning head OFV-056
juncjunction tion box box PSV-Z-04PSV-Z-040 (-0 (-H, -F, -U)H, -F, -U)
workstatiworkstation with on with keyboard and mousekeyboard and mouse
monitor with monitor cable and monitor with monitor cable and mains cablemains cable
tripod with fluid stage OFV-S2tripod with fluid stage OFV-S2
umbilical cableumbilical cable
interferometeinterferometer r cablecable
video cablevideo cable
acquisition cableacquisition cable
DIO/DIO/ DAC cDAC cableable
BNC cableBNC cable
2 RS-232 cables (1:1 wired)2 RS-232 cables (1:1 wired)
3 mains cables3 mains cables
PSV 300-H, -F: hand set PSV-Z-051PSV 300-H, -F: hand set PSV-Z-051
optionaloptional
TFT monitor with monitor cable and TFT monitor with monitor cable and mains cablemains cable
heavy duty tripod with motorized pan-tilt stage, connector box and mainsheavy duty tripod with motorized pan-tilt stage, connector box and mains
cable PSV-Z-017 (instead of the OFV-S2)cable PSV-Z-017 (instead of the OFV-S2)
PSV 300-H: generator cable for the PSV 300-H: generator cable for the internal function generatorinternal function generator
PSV 300-U: hand set PSV-Z-051PSV 300-U: hand set PSV-Z-051
coaxial unit OFV-056-Ccoaxial unit OFV-056-C
acoustic gate unit PSV-Z-EQ with BNC cableacoustic gate unit PSV-Z-EQ with BNC cable
system cabinet PSV-Z-035system cabinet PSV-Z-035
hand set OFV-310hand set OFV-310
vertical test stand PSV-Z-018vertical test stand PSV-Z-018
Please pay attention to the following steps when unpacking the PSV:Please pay attention to the following steps when unpacking the PSV:
1.1. ChecCheck the packk the packaging foaging for signs of unsr signs of unsuituitable hanable handling durdling during traning transporsport.t.
2.2. AftAfter unpacer unpacking, chking, check all compeck all componentonents for externs for external damagal damage (scrate (scratchesches,,
loose screws etc.).loose screws etc.).
3.3. In the cIn the case of a ase of a wrong deliverywrong delivery, damage , damage or missing or missing parts, parts, inform your inform your locallocal
Polytec representPolytec representatives immediately and give them the serial atives immediately and give them the serial numbers ofnumbers of
the instruments. The identificatithe instruments. The identification labels can on labels can be found on be found on the back of thethe back of the
instruments and also on the inside instruments and also on the inside cover of this manual.cover of this manual.
Protect the unpacked scanning head from hard jolts as these can lead to misalignment ofProtect the unpacked scanning head from hard jolts as these can lead to misalignment of
the interferometethe interferometerr !!
To Next Page
Loading...
Need help?
General
