Polytec PSV 300 User Manual


  
                
4.4. Carefully Carefully retain the retain the original paoriginal packaging in ckaging in case you case you have to have to return the return the PSVPSV..
Install the PSV as described inInstall the PSV as described insecsectiotionn 3.43.4and carry out a functional test asand carry out a functional test as
described indescribed insec
sectiotionn 3.53.5..
    
  
   The front panel of the controller is shown inThe front panel of the controller is shown infi
figugurere 3.3.11..

  
LL
EDED
The LThe L
EDED
lights up when the key switch on the controller is turned tolights up when the key switch on the controller is turned to
position I and indicates that the position I and indicates that the controller is ready to operate.controller is ready to operate.

   

This key switch disconnects the vibrometer from the mains (position O)This key switch disconnects the vibrometer from the mains (position O)
and is used to turn it off in the case of danger.and is used to turn it off in the case of danger.
        with background lightingwith background lighting
This display shows the settings of the controller. The organization of theThis display shows the settings of the controller. The organization of the
display and how to use it display and how to use it to operate the controller without the software areto operate the controller without the software are
described indescribed insec
sectiotionn 5.15.122..

  
keyskeys
These keys do not have a These keys do not have a function, when the controller is operated via thefunction, when the controller is operated via the
software. When the controller is operated without the software, the cursorsoftware. When the controller is operated without the software, the cursor
is moved up and down on is moved up and down on the display using thethe display using the
↑↑
andand
↓↓
keys (refer tokeys (refer to
sesectictionon 5.15.12.2.11).).
Figure 3.1: Front view of the controllerFigure 3.1: Front view of the controller


  
    
                

          

     

  
      


 
   
      
  
   

  




connect all connecting cablesconnect all connecting cables

switching the controller on!switching the controller on!

Polytec PSV 300 Specifications

General

Brand	Polytec
Model	PSV 300
Category	Measuring Instruments
Language	English