Polytropic PAC 16 - PAC Models Regulation

- 39 -
PAC models Regulation (use of the digital controller)
Water temperature setting
1. Press button until it displays “□1”, then press once. The water
temperature setting appears.
2. Adjust the value if necessary with button
or .
3. Press
once to validate (to set the value).
Suggested water temperature is 28°C.
Defrost temperature setting
1. Press button until it displays “□2”), then press once. The water
temperature setting appears.
2. Adjust the value if necessary with button
or to « 7 ».
3. Press
to validate (to set the value).