EasyManua.ls Logo

Ponast KP 21 - Ceramic Parts; Boiler Sheathing; Standard Equipment; Optional Accessories

Default Icon
43 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Automatic boiler for pellets – User manual
30
8.3 CERAMIC PARTS
purpose:
- to protect some metal parts from being affected by a direct flame
- to divert hot air and flames in the inner area of the boiler
- as a ceramic catalyst for flue gases afterburning.
the ceramic set consists of the following:
- ceramic reflector - located on the upper surfaces of the burner
- ceramic extension grate - located in the boiler body above the burner furnace
- ceramic shield - located above the door
- ceramic door facing.
8.4 BOILER SHEATHING
The product sheathing is made of steel sheets, it is provided with a durable varnish applied by a powder
varnishing technology (KOMAXIT), resistant to usual environmental effects and ensuring perfect appearance of the
product.
Thermal insulation 2 resp. 8 cm thick is made of ROCKWOOL type thermal insulation plates.
8.5 STANDARD EQUIPMENT
- Boiler operating and maintenance manual.
- Certificate of product quality and completeness - Letter of guarantee
- Cleaning tools (a scrapper for manual cleaning of the boiler body)
- Inlet / emptying valve ½ "
Standard equipment is dispatched from the production plant inserted into the boiler ash pan.
8.6 OPTIONAL ACCESSORIES
- Automatic ignition - (for KP 10, KP 20) a system for automatic fuel ignition in the burner (consists of 2
heating coils operated via the control unit + electric wiring).
- Semi-automatic exchanger cleaning - (for KP 10, KP 20) a complete system for semi-automatic
exchanger cleaning, inbuilt into the boiler body (enables cleaning of the boiler exchanger during operation
without the necessity to disassemble the boiler lid and part of the casing).
- Moderate heating - protects the heating system against any damage by frost (usable for heating units -
TJ M 48/2 output equal to 2.4; 3; 4; 4.5 and 6 kW).
- Circulation pump
- Digital room thermostat
- Reservoir for supply water heating
- Accumulation reservoir (e.g. 500 l, 750 l, 1000 l).
- Screw feeder (from the seasonal bin) - to refill the fuel in the daily bin.
- Pneumatic fuel feeder (from the seasonal bin) - to refill the fuel in the daily bin from a larger distance.
- GSM modem - for remote control and monitoring of the boiler operation.
- Fuel bin
- Fuel feeder F1
Optional accessories are not included in the price of the boiler.

Table of Contents