Automatic boiler for pellets – User manual
37
12 PRODUCT LIQUIDATION AFTER ITS SERVICE LIFE IS OVER
The product is made of materials which do not produce any hazardous waste.
After the product service life is over, these four main types of waste are created:
1. Heat exchanger, casing, feeders, bin - waste code 170405, category O.
2. Thermal insulation (ROTAFLEX, SIBRAL) - waste code 170604, category O.
3. Ceramic grate, reflector and door plates - waste code 170103, category O.
4. control unit with sensors and control elements - waste code 200136, category O.
12.1 NATURAL PERSON
carries out the liquidation of the product as follows:
1. Sell the steel waste to the closest metal collection centre.
2. Thermal insulation and ceramics as municipal solid waste.
3. The control unit with sensors and control element have to be returned to the manufacturer. The goods are
collected by the vendor's business premises where the boiler was bought or by the manufacturer. The return
is free of charge.
According to the current environmental requirements, the electronic parts of the product contain no lead!
Do not throw away any electric equipment as municipal solid waste!
12.2 LEGAL ENTITY
conducts liquidation according to the law no. č.185/2001 - Act on Wastes as amended. The legal entity sorts the
waste according to its type and category (see main waste types) and hands it over for liquidation to an authorized
person.
The control unit with sensors and control element is an exception, it can be returned back to the manufacturer.
The goods are collected by the vendor's business premises where the boiler was bought, or by the manufacturer
of the boiler. The return is free of charge.
According to the current environmental requirements, the electronic parts of the product contain no lead!
13 GUARANTEE AND LIABILITY FOR DEFECTS
The manufacturer provides a guarantee:
- for the boiler for 24 months from putting the boiler into operation but no longer than 30 months from the
date of shipment from the production plant.
- for the boiler body for 60 months from putting the boiler into operation.
- ceramic parts are not a subject of guarantee, they are consumable supplies.
Guarantee conditions
1) The user is obliged to arrange installation of the boiler and put it into operation by the manufacturer or by an
authorized organisation (hereinafter referred to as an authorized person) that has a certification from the
manufacturer and meets required qualification conditions. Furthermore, the user is obliged to send the
guarantee certificate no. 1
to the manufacturer immediately after putting the boiler into operation 2). The
boiler has to be operated only within the purpose of these Operating instructions and only the prescribed fuel
(wooden pellets φ 6-8.5 mm) free from any additives and foreign objects may be used.
3) If the user wants to apply any form of guarantee, he has to prove himself by the guarantee certificate no. 2
correctly filled in.
4) The user is obliged to prove that the product has been maintained in regular intervals that are described in the
"MAINTENANCE" chapter, after the annual revision is carried out, the authorized person is obliged to put a
record into "the record of carried out repairs" (part of the operating manual) and send a valid report of repair /
service intervention to the manufacturer's address within 14 days from the repair / service intervention.
5) Every claim has to be sent to the manufacturer in written form immediately after it is ascertained.
6) If the conditions listed in points 1-5 paragraph 12.1 are not met, it is impossible to claim any guarantee
compensation from the manufacturer.
The manufacturer reserves the right for innovatory changes to the product which do not have to be a
part of this manual.
To Next Page
