Rear
Lamps
To
change any rear bulb,
you
have to remove the
entire housing.
1.
Remove the trim panel from the
side
that
you
are
replacing the bulb.
2.
Pull the carpet back.
4.
5.
6.
7.
3.
Remove the wing nuts.
Pull
off
the
assembly
from
the
outside.
To
remove a socket with a tab,
press
the
tab and turn
the socket counterclockwise.
To
remove a socket
without a tab, turn the socket counterclockwise.
To
remove the bulb, push in
and
turn it
counterclockwise, then pull it out.
Reverse the steps with
a
new bulb.
6-45
To Next Page
Loading...
Need help?
General
