Pontiac 2002 Aztek User Manual

1-7
To recline the seatbacks, do the following.
Lift up on the recliner lever
located on the outboard side
of the seatback.
Use the recliner lever to move the seatback to the
desired position.
It is easier to raise or lower the seatback if you lean
forward and take the weight off the seatback.
To fold the seatback forward, do the following.
Lift up on the recliner lever and fold the seatback
forward. The seatback will lock into place.
Lift up on the lever again to raise the seatback. The
seatback will lock into place when you push it back to
the upright position.
After raising a seatback to an upright position, push and
pull on the seatback to check that it is locked upright.
Removing the Split Bench Seat
Each section of the split bench seat can be flipped
forward or removed individually.
1. Unlatch the shoulder belt from the lap-belt.
2. Make sure the seatback is in the upright position.
3. Lift the seatback recliner lever to fold the seatback
forward.

Pontiac 2002 Aztek Specifications

General

Brand	Pontiac
Model	2002 Aztek
Category	Automobile
Language	English