2-105
FUEL USED: The fuel used display will show you how
much fuel has been used since the last time it was reset.
To reset the fuel used to zero, press and hold the SET
button while the fuel used is displayed on the DIC and
until the display goes to zero.
AVG SPEED (Average Speed): The average speed
display will show you your average speed from when
you first started your vehicle. To reset the average
speed, press and hold the SET button while the average
speed is displayed on the DIC and until the speed resets
to your current speed.
OIL LIFE LEFT HOLD SET TO RESET: This
message displays the current percentage of the GM Oil
Life System
t
. Be careful not to reset this display other
than when the oil has been changed. See “How to Reset
the Change Engine Oil Message” in the Index.
USE SET TO SELECT ENGLISH METRIC: You
can use this display to select English or metric. Press the
SET button to toggle between English or metric. The
odometer, the trip odometer and if your vehicle is
equipped the head
-up display will also change.
OFF: No driver information will be displayed in this
mode. If the DIC is left in this mode for more than three
seconds, the display will turn off. Press the MODE
button to start the DIC.
Compass Variance
Compass variance is the difference between magnetic
north and geographic north. In some areas of the
country, the difference is great enough to cause the
compass to give false readings. If this occurs, the
compass must be set.
Automatic Compass Calibration
The compass is self-calibrating, which eliminates the
need to manually set the compass. When the vehicle is
new, the calibration process may not be complete. In
these cases, the calibration symbol C will be displayed
where the compass reading is normally displayed.
To calibrate the compass, in an area free from large
metal objects, make three 360 degree turns. The
calibration symbol will turn off and the compass reading
will be displayed.
To Next Page
Loading...
Need help?
General
