2-63
With this feature, your vehicle has a fully insulated
food/beverage console/cooler located between the
driver’s and front passenger’s seats.
To properly secure the console/cooler, the handle must
be latched down, toward the driver’s seat, as indicated
on the cooler handle.
To open the console/cooler, have the handle fully down
toward the passenger’s seat. Then lift the lid up. The
passenger’s seat armrest must be up to be able to open
the lid completely.
The console/cooler contains a top tray for storage.
Remove the top tray to put items in the cooler. Put the
top tray back into the cooler if there is room. The cooler
also contains a rubber mat that can hold compact discs,
cassette tapes, and it has a coinholder. You can also
remove the rubber mat.
Once items are removed or added, properly secure the
console/cooler, as described earlier.
To remove the console/cooler from the vehicle, lift the
handle from the driver’s side to a fully upright position,
and remove it. To replace the console/cooler, place it in
its storage area and press the handle down to the driver’s
side until you hear a click. Move the console/cooler
side
-to-side to make sure it is locked in place.
NOTICE:
Your warranty does not cover parts or
components that fail because of overloading.
Cargo Cover
CAUTION:
An improperly stored cargo cover could be
thrown about the vehicle during a collision or
sudden maneuver. You or others could be
injured. If you remove the cover, always store it
properly. When you put it back, always be sure
that it is securely reattached.
To Next Page
Loading...
Need help?
General
