2-64
Sliding Rear Convenience/Cargo
Tray (Option)
CAUTION:
If the sliding rear convenience/cargo tray isn’t
secured properly, it can move around in a
collision or sudden stop. People in the vehicle
could be injured. Be sure to secure the sliding
rear convenience/cargo tray properly.
The main purpose of the optional sliding rear
convenience/cargo tray is to provide added convenience
when using the rear of your vehicle by making it easier
to load, organize and remove items from your vehicle.
The tray can be pulled out onto the tailgate for easier
loading or unloading and then rolled back into the
vehicle.
1. Press the release lever located in front of the handle
of the tray to release the pin from the floor track
assembly.
2. Pull the tray toward you without lifting it up. You
will hear a click when the tray is locked into the
extended position.
3. Press the release lever again to roll the tray back into
the vehicle. You will hear a click when the tray is
locked into position.
The sliding rear convenience/cargo tray can provide
more storage in the rear of the vehicle. There are two
separate storage compartments contained in it, one on
the driver’s side and one on the passenger’s side.
The driver’s side storage compartment provides a
hidden storage area for miscellaneous items. To open the
driver’s side storage compartment, pull up on the top of
the cover. The cover opens to the right and lies
completely flat on top of the passenger’s side storage
compartment, if the passenger’s side storage
compartment cover is closed. The passenger’s side
storage compartment cover is not designed to support
the driver’s side storage compartment cover in an
upright position. Do not drive with the driver’s side
storage compartment open.
The passenger’s side storage compartment has three
compartments with integrated divider nets. To open the
cover(s), pull up on each. The left cover opens to the left
and the right cover opens to the right.
To Next Page
Loading...
Need help?
General
