1-44
3. Be sure the belt is not twisted and it lies flat.
The guide must be on top of the belt.
4. Buckle, position and release the safety belt as
described in “Center Passenger Position” later in this
section. Make sure that the shoulder belt crosses over
the shoulder.
To remove and store the elastic cord, remove it from the
comfort guide. The elastic cord will go back under the
driver’s side head restraint.
Center Passenger Position
Lap-Shoulder Belt
If your vehicle has a bench seat, someone can sit in the
center position.
When you sit in the center seating position, you have a
lap safety belt, which has no retractor. You also have a
shoulder belt, which has a retractor. In order to have the
protection of the shoulder belt, you must first connect it
to the lap belt.
To Next Page
Loading...
