5-6
7. Don’t let the other end
touch metal. Connect it
to the positive (+)
terminal of the good
battery. Use a remote
positive (+) terminal if
the vehicle has one.
8. Now connect the black
negative (
-) cable to the
negative (
-) terminal of
the good battery. Use a
remote negative (
-)
terminal if the vehicle
has one.
Don’t let the other end touch anything until the next
step. The other end of the negative (
-) cable doesn’t
go to the dead battery. It goes to a heavy, unpainted
metal engine part or to a remote negative (-) terminal
on the vehicle with the dead battery.
To Next Page
Loading...
