Pontiac 2002 Aztek - Page 328

5-43
Storing the Flat Tire with the Sliding Rear
Convenience/Cargo Tray (Option)
A. D-ring
B. Sliding Rear
Convenience/
Cargo Tray
C. Wing Nut
D. J-hook
E. Full
-size Tire
F. Storage
Compartment
Cap Hole
1. Push the sliding rear tray forward to the stored
position.
2. Open the driver’s side storage compartment door
of the sliding rear tray.
3. Remove the rear cap on the bottom of the storage
compartment and flip the D
-ring up.
4. Lay the tire on top of the driver’s side storage
compartment with the valve stem down. Make sure
you can see the D
-ring through the center hole of
the tire.
5. Remove the J
-hook and the wing nut from the back
of the jack access door. Assemble the wing nut and
the J
-hook.
6. Install the wing nut and the J-hook to the D-ring
through the center hole of the tire.