6-37
Headlamps
1. Open the hood.
2. Push in on the headlamp
and lift up the headlamp
retaining clip partway,
but do not remove.
3. Unsnap the headlamp assembly by pulling it
forward, away from the vehicle.
4. Disconnect the electrical connector by pulling back
on the locking tab, located on the electrical
connector, to separate the two connectors.
5. Remove the bulb
access cover.
6. Turn the bulb socket one
-quarter of a turn clockwise.
7. Pull the bulb assembly out from the lamp housing.
To Next Page
Loading...
