2-10
This device complies with RSS-210 of Industry Canada.
Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation of
the device.
Changes or modifications to this system by other than
an authorized service facility could void authorization to
use this equipment.
At times you may notice a decrease in range. This is
normal for any remote keyless entry system. If the
transmitter does not work or if you have to stand closer
to your vehicle for the transmitter to work, try this:
D
Check the distance. You may be too far from your
vehicle. You may need to stand closer during rainy
or snowy weather.
D
Check the location. Other vehicles or objects may be
blocking the signal. Take a few steps to the left or
right, hold the transmitter higher, and try again.
D
Check to determine if battery replacement is
necessary. See the instructions that follow.
D
If you’re still having trouble, see your dealer or a
qualified technician for service.
Operation
Remote Driver Door Unlock
When you press UNLOCK on the remote keyless entry
transmitter, only the driver’s door will unlock. If you
press UNLOCK again within five seconds, the
passenger’s doors will unlock.
If you would like all the doors to unlock the first time
you press UNLOCK, see “Vehicle Customization” in
the Index.
The UNLOCK button on the remote keyless entry
transmitter will disarm the content theft
-deterrent
system. See “Content Theft
-Deterrent” in the Index
for more information.
Remote All Door Lock
To lock all doors, press LOCK on the remote keyless
entry transmitter.
The LOCK button on the remote keyless entry
transmitter will arm the content theft-deterrent system.
See “Content Theft
-Deterrent” in the Index for more
information.
To Next Page
Loading...
