Getting to Know Your Aztek
8
To cool the vehicle interior more quickly
on very hot days, open the windows just
long enough to let the hot air escape.
For quick cooling, press the button
to activate the recirculation mode.
Use the Mode knob on the right of the
heat and A/C control panel to direct air
to the instrument panel vents
(VENT), half to the instrument panel
vents and half to the floor
(BI-LEVEL), the floor (FLOOR), or to
the windshield to defog or
defrost .
Regulate the airflow by turning the fan
control knob ( ) clockwise for more air
volume.
See Section 3 of your Owner Manual.
Manual Climate Control System
Interior Lamps
The interior lamp control on the instru-
ment panel can be set to:
• OFF, which disables the interior
lamps entirely, whether or not a door
is open
• DOOR, which turns on the interior
lamps when a door is opened
• ON, which turns the interior lamps on
continuously
To adjust instrument panel lamp bright-
ness, press on the center of the interior
lamp control and it will extend. Twist the
knob to achieve the desired illumination
level, and push the control knob to its
stored position.
See Section 3 of your Owner Manual.
Note: If the interior lamps do not illumi-
nate when opening a door, most likely
the lamp control is in the “Off” position
(see instructions above).
To Next Page
Loading...
