POOL LAB PL25 - SETTING THE TIME AND DATE; SETTING ON; OFF TIMERS

SETTING THE TIME AND DATE
Time is displayed in 24 hour format. 00:00 is midnight, 12:00 is midday.
Date is displayed in day / month / year format.
Setting the correct date will allow the system to automatically adjust for daylight savings
time.
The clock will continue to run for several days without power. If power is disconnected for
an extended period of time, the clock may reset.
– Press the VIEW button once from the HOME VIEW to display the TIME / DATE
VIEW.
– Current time and date settings are displayed.
– Press either the UP or DOWN button once to enter adjustment mode.
– The HOUR digits will be flashing to indicate adjustment mode.
– Use the UP and DOWN buttons to select the correct HOUR value
– Press VIEW to switch to the MINUTES field.
– Use the UP and DOWN buttons to select the correct MINUTES value
– Continue this process for YEAR, MONTH, and DAY fields.
– Press VIEW to save the settings.
SETTING ON / OFF TIMERS
Two separate ON / OFF time periods for the filtration pump are available. You can use
either one, both or none of these depending on your requirements.
Time periods can be set to traverse midnight.
Time periods can overlap, in which case they will be treated as one time period.
Either or both of the timers can be disabled by setting both ON and OFF times the same.
A disabled timer will show ON and OFF times as dashes (--:--)
Timers are labeled #1, and #2.
The first column shows the ON time.
The second column shows the OFF time.
Time period settings should be retained even after extensive periods without power.
– Press the VIEW button twice from the HOME VIEW to display the TIMERS VIEW.
– Current ON / OFF times are displayed.
– Press either the UP or DOWN button once to enter adjustment mode.
– The HOUR digits of ON time #1 will be flashing to indicate adjustment mode.
– Use the VIEW button to cycle to the field you need to adjust.
– Use the UP and DOWN buttons to select the correct value.
– When finished, use the VIEW button to cycle past the last adjustable field to save
the settings.
10